TL;DR
Get cleaning gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A project featured by Hunker shows BK Woodworking building a wall-mounted folding table from reclaimed pallet wood. The table folds down when not in use and can serve as a narrow ledge, though it must be secured to wall studs to support weight.
A BK Woodworking DIY video shows a maker turning reclaimed pallet boards into a wall-mounted folding table that can be folded away when it is not in use. Hunker reported on the build, which attaches beneath a window and doubles as a slim ledge when raised.
The table is assembled from eight pallet-wood boards, trimmed to roughly one-by-two dimensions and arranged with small gaps between them. Perpendicular cleats fixed beneath the boards hold the tabletop together. Hunker’s account says the maker also uses a one-by-eight board as a wall-side ledge, plus hinges, screws, a brad nailer and wood filler.
A hinged support folds beneath the table when it is put away. The described design uses two one-by-fours joined at the rear, a grooved piece that accommodates a perpendicular one-by-two, and a triangular folding brace. The wood is filled and sanded for a smoother finish. Hunker says the table should be attached directly to wall studs, warning that it will not hold much weight otherwise; a laser level may help align the installation.
A Table That Folds Away
The design addresses a practical problem in small rooms: a fixed tabletop takes up floor area even when nobody is using it. Folding the surface against the wall can free that space, while leaving a narrow ledge available for decor or other light items. The project also shows one way to reuse pallet boards rather than buy all the lumber new.
Its usefulness depends on the build and installation, not just the reclaimed material. Pallet wood needs preparation, and a wall-mounted table’s support and fasteners must suit the wall and intended load. The source provides no tested weight limit, so readers should not assume the design can safely carry a particular amount.
As an affiliate, we earn on qualifying purchases.
From Pallet Boards to Table
Hunker’s report frames pallets as a possible low-cost source of DIY lumber, noting that some may be available for free. The material is not ready for assembly as-is: the project video begins by removing nails, sanding and trimming the boards, and running the wood through a planer. Hunker says this preparation leaves the maker with boards suited to the table’s frame and top.
The video is attributed to BK Woodworking on YouTube. Hunker’s article describes the construction and materials, but does not provide independent testing of the finished table, a complete cost estimate, or a verified estimate of how much floor space it saves. The project is presented as a DIY example, not a certified furniture product.
“The table attaches directly to his wall beneath a window.”
— Hunker, reporting on the BK Woodworking project
reclaimed wood pallet furniture supplies
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Load Limits Are Not Given
The source does not specify the table’s maximum safe load, the exact dimensions, or the type and number of wall fasteners used in the video. It also does not report whether the finished table was independently tested or how it performs after repeated folding. Pallet condition and suitability can vary, and the article does not identify the source or treatment of the boards used in this particular build.
Hunker’s report describes the project but does not establish that every pallet is appropriate for indoor furniture or that every wall can support the same installation. Those details need to be checked for the materials and site before copying the design.
As an affiliate, we earn on qualifying purchases.
Check the Wall Before Building
The source does not announce a follow-up test or additional project update. For anyone considering the design, the next practical step is to review BK Woodworking’s video alongside the written materials list, then check the pallet boards for damage and prepare them before assembly. The report recommends a laser level for positioning and says the table should be fixed into wall studs.
Before placing weight on a finished table, builders would need to assess the wall, hinges, brace and fasteners for their specific setup. The source gives no load rating, so it cannot establish what the table can safely hold.
As an affiliate, we earn on qualifying purchases.
Key Questions
What does the pallet-wood project make?
It makes a wall-mounted folding table that sits beneath a window in the video and folds up into a narrow ledge when not in use.
What materials and tools does the described build use?
Hunker’s account lists prepared pallet boards, a one-by-eight ledge board, one-by-fours, hinges, screws, wood filler and a brad nailer. The boards are also sanded and trimmed before assembly.
How much weight can the table hold?
The report does not give a weight limit. It says the table must be attached to wall studs and warns that it will not hold much weight otherwise.
Does the table disappear completely when folded?
No. In the described design, the tabletop folds away, while a wall-side ledge remains available for decor or similar light items.
Does Hunker say the finished table was tested?
No testing results are reported. Hunker’s article describes the video build, but gives no independent durability test or verified load rating.
Source: rss
Columbus Day / Indigenous Peoples' Day Picks
long weekend sales
As an affiliate, we earn on qualifying purchases.
